Switch Huawei S380-L4P1T 4 puertos, PoE+, 8 Gbps, Gestionado
  Los switch de red Huawei eKit SME están diseñados para el mercado de las PYMES. Cuentan con redes Ethernet flexibles, control de seguridad diversificado y abundantes métodos de gestión, y proporcionan un mayor rendimiento y capacidades de procesamiento de servicios más completas. Se utilizan ampliamente en hoteles económicos, fábricas, instituciones educativas pequeñas y medianas, hospitales de acogida y escenarios de edificios.
 
  Huawei eKitEngine S380-L4P1T – Switch – Managed – 1 x 10/100/1000 (PoE+) + 3 x 10/100/1000 – rack-mountable – PoE+ (50 W)
  
Product Description : Huawei eKitEngine S380-L4P1T – switch – 4 ports – Managed – rack-mountable
Device Type : Switch – 4 ports – Managed
Enclosure Type : Rack-mountable 0.8
Subtype : Gigabit Ethernet
Ports : 1 x 10/100/1000 (PoE+) + 3 x 10/100/1000
Power Over Ethernet (PoE) : PoE+
PoE Budget : 50 W
Features : Cloud managed, ground points
Power : AC 100-240 V (50/60 Hz)
Dimensions (WxDxH) : 21 cm x 13 cm x 3.5 cm
Weight : 900 g
Product Description : Huawei eKitEngine S380-L4P1T – switch – 4 ports – Managed – rack-mountable
Device Type : Switch – 4 ports – Managed
Enclosure Type : Rack-mountable 0.8
Subtype : Gigabit Ethernet
Ports : 1 x 10/100/1000 (PoE+) + 3 x 10/100/1000
Power Over Ethernet (PoE) : PoE+
PoE Budget : 50 W
Features : Cloud managed, ground points
Power : AC 100-240 V (50/60 Hz)
Dimensions (WxDxH) : 21 cm x 13 cm x 3.5 cm
Weight : 900 g
  Basic information about the S380-L4P1T
 
| Item | Details | 
|---|---|
| Description | S380-L4P1T, 1*GE WAN, 4*GE LAN(PoE+, 50W) | 
| Part Number | 98012178 | 
| Model | S380-L4P1T | 
| First supported version | V600R022C10 | 
Components
   Figure 4-3
  
  S380-L4P1T appearance
  
| 
 
      1
      
 | 
 
      CLOUD indicator
      
 | 
 
      2
      
 | 
 
      SYS indicator
      
 | 
| 
 
      3
      
 | 
 
      One RST button
      
      NOTICE:
     
      To restore the factory settings and reset the device, hold down the button for at least 6 seconds.
      
      To reset the device, press the button.
      
      Resetting the device will cause service interruption. Exercise caution when you press the button.
      
 | 
 
      4
      
 | 
 
      Three GE PoE+ LAN electrical ports
      
 | 
| 
 
      5
      
 | 
 
      One GE PoE+ LAN/WAN electrical port
      
 | 
 
      6
      
 | 
 
      One GE WAN electrical port
      
 | 
| 
 
      7
      
 | 
 
      Port indicator
      
 | 
 
      8
      
 | 
 
      Port indicator status switch button
      
      NOTE:
     
      Port status: The port indicator indicates the data transmission status of the port.
      
      PoE status: The port indicator indicates the PoE status of the port.
      
 | 
| 
 
      9
      
 | 
 
      Power adapter socket
      
      NOTE:
     
      Use the power adapter (56 V 1.07 A) delivered with the device.
      
 | 
 
      10
      
 | 
 
      Ground screw
      
 | 
Ports
   Table 4-7
  
  Ports on the S380-L4P1T
 
| Port | Connector Type | Description | Available Components | 
|---|---|---|---|
| GE PoE+ LAN electrical port | RJ45 | 
 
      A GE PoE+ LAN electrical port sends and receives LAN service data at 10/100/1000 Mbit/s.
      
      The port supports PoE function.
      
 | 
|
| GE WAN electrical port | RJ45 | A GE WAN electrical port sends and receives WAN service data at 10/100/1000 Mbit/s. | |
| GE PoE+ LAN/WAN electrical port | RJ45 | 
 
      A GE PoE+ LAN/WAN electrical port sends and receives LAN or WAN service data at 10/100/1000 Mbit/s.
      
      The port supports PoE function.
      
 | 
Indicators and Buttons
   Table 4-8
  
  Description of indicators on the device
 
| 
 
      Indicator
      
 | 
 
      Name
      
 | 
 
      Color
      
 | 
 
      Status
      
 | 
 
      Description
      
 | 
|---|---|---|---|---|
| 
 
      SYS
      
 | 
 
      System status indicator
      
 | 
 
      –
      
 | 
 
      Off
      
 | 
 
      The system is not running or is in the reset state.
      
 | 
| 
 
      Green
      
 | 
 
      Fast blinking
      
 | 
 
      The system is in the power-on loading or reset startup state.
      
 | 
||
| 
 
      Green
      
 | 
 
      Slow blinking
      
 | 
 
      The system is running normally.
      
 | 
||
| 
 
      Green
      
 | 
 
      Steady on
      
 | 
 
      During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 15 seconds.
      
 | 
||
| 
 
      Red
      
 | 
 
      Steady on
      
 | 
 
      The device cannot be started or the power supply is faulty.
      
 | 
||
| 
 
      Cloud
      
 | 
 
      Cloud indicator
      
 | 
 
      –
      
 | 
 
      Off
      
 | 
 
      The WAN port does not obtain an IP address.
      
 | 
| 
 
      Blue
      
 | 
 
      Steady on
      
 | 
 
      The network is connected, and the WAN port obtains an IP address.
      
      NOTE:
     
      This function is available in V600R023C00 and later versions. In V600R022C10, the indicator is still off when the WAN port obtains an IP address.
      
 | 
||
| 
 
      Blue
      
 | 
 
      Fast blinking
      
 | 
 
      The device is connecting to the cloud.
      
 | 
||
| 
 
      Blue
      
 | 
 
      Slow blinking
      
 | 
 
      The device is in the cloud management state.
      
 | 
||
| 
 
      –
      
 | 
 
      Port indicator (Port status)
      
 | 
 
      –
      
 | 
 
      Off
      
 | 
 
      The port is not connected or has been shut down.
      
 | 
| 
 
      Green
      
 | 
 
      Steady on
      
 | 
 
      A link has been established on the port.
      
      NOTE:
     
      During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
      
 | 
||
| 
 
      Green
      
 | 
 
      Blinking
      
 | 
 
      The port is sending or receiving data.
      
 | 
||
| 
 
      Port indicator (PoE status)
      
 | 
 
      –
      
 | 
 
      Off
      
 | 
 
      The port is not supplying PoE power.
      
 | 
|
| 
 
      Green
      
 | 
 
      Steady on
      
 | 
 
      The port is supplying power to the connected PD.
      
 | 
||
| 
 
      Green
      
 | 
 
      Blinking
      
 | 
 
      The PoE power of the device is insufficient, and the port cannot provide power to the PD.
      
 | 
Power Supply System
  The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The power adapter can provide 50 W PoE power, which ensures full PoE power on 3 ports in compliance with 802.3af or on 1 port in compliance with 802.3at.
 
Heat Dissipation System
  The device has no fans and uses natural heat dissipation.
 
Technical Specifications
   Table 4-9
  
  Technical specifications of the S380-L4P1T
 
| Item | Specification | 
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | 
 
      Basic dimensions (excluding the parts protruding from the body): 35.0 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.)
      
      Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 35.0 mm x 210.0 mm x 136.3 mm (1.38 in. x 8.27 in. x 5.37 in.)
      
 | 
| Dimensions with packaging (H x W x D) [mm(in.)] | 90.0 mm x 285.0 mm x 180.0 mm (3.54 in. x 11.22 in. x 7.09 in.) | 
| Chassis height [U] | 0.8 U | 
| Chassis material | Metal | 
| Weight without packaging [kg(lb)] | 0.9 kg (1.98 lb) | 
| Weight with packaging [kg(lb)] | 1.1 kg (2.43 lb) | 
| Typical power consumption [W] | 7.19 W | 
| Typical heat dissipation [BTU/hour] | 24.5 BTU/hour | 
| Maximum power consumption [W] | 61.65 W (PoE: 50 W) | 
| Maximum heat dissipation [BTU/hour] | 210.4 BTU/hour | 
| Static power consumption [W] | 4.54 W | 
| MTBF [years] | 75.89 years | 
| MTTR [hours] | 2 hours | 
| Availability | > 0.99999 | 
| Noise at normal temperature (acoustic power) [dB(A)] | Noise-free (no fans), < 30 | 
| Noise at normal temperature (acoustic pressure) [dB(A)] | Noise-free (no fans), < 20 | 
| Number of card slots | 0 | 
| Number of power slots | 0 | 
| Number of fans modules | 0 | 
| WAN ports | 1 x GE WAN | 
| LAN ports | 4 x GE LAN (50 W PoE+) | 
| Redundant power supply | Not supported | 
| Long-term operating temperature [°C(°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.) | 
| Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). | 
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) | 
| Long-term operating relative humidity [RH] | 5% RH to 95% RH (non-condensing) | 
| Long-term operating altitude [m(ft.)] | 0–5000 m (0–16404 ft.) | 
| Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) | 
| Power supply mode | Power adapter | 
| Rated input voltage [V] | 
 
      Power adapter input: 100–240 V AC; 50/60 Hz
      
      Power adapter output: 56 V DC
      
 | 
| Input voltage range [V] | Power adapter input: 90–290 V AC; 47–63 Hz | 
| Maximum input current [A] | 1.07 A | 
| Memory | DDR4: 512 MB | 
| Flash memory | NAND Flash: 512 MB | 
| Console port | Not supported | 
| Eth Management port | LAN port | 
| USB | Not supported | 
| RTC | Not supported | 
| RPS input | Not supported | 
| Service port surge protection [kV] | Common mode: ±4 kV | 
| Power supply surge protection [kV] | Power adapter: ±6 kV in differential mode and ±6 kV in common mode | 
| Ingress protection level (dustproof/waterproof) | IP20 | 
| Types of fans | None | 
| Heat dissipation mode | Natural heat dissipation | 
| Airflow direction | – | 
| PoE | Supported | 
| Certification | 
 
      EMC certification
      
      Safety certification
      
      Manufacturing certification
      
 |