Hikvision Switch 4 Puertos No Adm.POE+ 10/100 Mbps 45W 300mt Smart
El Switch Hikvision Fast Ethernet 4x PoE+, 1x Uplink DS-3E1105P-EI es un dispositivo de red que cuenta con una anchura de 105 mm y está diseñado para ofrecer conectividad a múltiples dispositivos. Este switch dispone de cuatro puertos Power over Ethernet (PoE+) que permiten la transmisión de datos y energía eléctrica simultáneamente, lo cual resulta muy útil en entornos donde se requiere alimentar cámaras IP o teléfonos VoIP.
4 Port Fast Ethernet Smart POE Switch
4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
Total PoE Power Budget 45W
Support 802.1Q VLAN
Support PoE watchdog to detect and restart the cameras that do not respond
Support STP/RSTP Loop prevention
Support cable detection to locate failure
Up to 300 m Long Range PoE Transmission
6 KV Surge Protection
General
Carcasa
Metal material, fan-free design
Peso neto
0.26 kg (0.573 lb)
Peso bruto
0.75 kg (1.65 lb)
Dimensiones (W x H x D)
121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”)
Temperatura de funcionamiento
0 °C to 40 °C (32 °F to 104 °F)
Temperatura de almacenamiento
-40 °C to 85 °C (-40 °F to 185 °F)
Condiciones de humedad
5% to 95% (no condensation)
Humedad relativa
5% to 95% (no condensation)
Fuente de alimentación
54VDC, 0.92A
Modo de instalación
Desk-Mounted,Wall-Mounted
Max. El consumo de energía
50 W
Consumo de energía en inactivo
5 W
Surge Protection
6 KV
Parámetros de red
Puertos
4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
Tabla de direcciones MAC
2 K
Capacidad de conmutación
1.2 Gbps
Tasa de reenvío de paquetes
0.89 Mpps
Caché interna
768 Kbits
Fuente de alimentación PoE
PoE Standard
IEEE 802.3af,IEEE 802.3at
Pin de alimentación PoE
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Puerto PoE
PoE: Ports 1 to 4
Max. Puerto de alimentación
30 W
PoE Power Budget
45 W
Función de software
Port Isolation
Ports 1 to 4: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 4: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 1 aggregation groups.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Suppport 802.1w RSTP.
VLAN
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLAN.
Largo alcance
Ports 1 to 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
System Maintenance
Support remote management via Hik-Partner Pro.
VIP Port
Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
Certificaciones
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Seguridad
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Química
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)